LESU RD-A0004 1/16 hydraulic AOUE AT60H articulated truck model Tamiya-complete truck-PRODUCTS-Manufacturer simulation models

LESU RD-A0004 1/16 hydraulic AOUE AT60H articulated truck model Tamiya

AOUE hydraulic 1/16 AT60H articulated truck. Full metal CNC shell.
Size: L*W*H (MM) 665 X 201 X 221

Net weight: 12.6KG

The car uses a 1:14 planetary two-speed high torque gearbox, 6X6 full-drive wheel-side reduction axle with differential lock. The powerful torque allows the winch to walk on the muddy road like a flat ground.

The steering adopts hydraulic steering. The steering angle is ±40 degrees. Strong steering angle without losing flexibility. The control experience of human and vehicle integration. Even a novice can drive the feeling of an old driver.

The hydraulic lifting and lowering body has a lifting angle of 55 degrees. With steering and body safety lock pins.

The car shell adopts all-metal CNC processing technology. The lines are streamlined, nice. Full metal chassis. The whole car is sandblasted, which is convenient for players to paint.

The front suspension adopts independent suspension with stabilizer bar. The rear suspension adopts Straddle mounted bogie beam. Independent wheel movement via a 3-point mounting system. (Straddle mounted bogie beam. Independent wheel movement via a three-point mounting system). The powerful suspension greatly increases the working range of the clamp. Off-road capability.

Electronic equipment: ESC adopts Hobbywing 1060 brushless ESC and Hobbywing Skywalker 50a brushless ESC. Equipped with light set. 20 LED lights (spotlights, lighting lights, width indicator lights, etc.). Equipped with steering gear and motor. Players only need to equip the remote control and battery to play.

The integrated hydraulic system is easy to disassemble and install. The hydraulic oil pump adopts a new 4 MPa high pressure oil pump. 2-channel directional valve. Hydraulic radiator. The whole car adopts copper tube layout. The details are full. The hydraulic oil is recommended to use No. 46 hydraulic oil. Add 120ml of hydraulic oil. 1. Connect the two-channel reversing valve steering gear control line and the hydraulic pump ESC control line, unscrew the oil tank cap, and pre-fill 60ml hydraulic oil.
2. Turn on the hydraulic pump motor and pay attention to the direction of rotation of the hydraulic pump motor.
3. Control the rotation of the steering gear of the reversing valve, and control the hydraulic cylinders of the whole vehicle to reciprocate for multiple maximum stroke actions, and at the same time, add about 30ml of hydraulic oil at intervals.

4. After the hydraulic cylinder performs smoothly, the emptying operation of the hydraulic system is completed, and the fuel tank cap is tightened. (That is to operate the hydraulic pressure while adding oil. The added hydraulic oil is about 120ml).